ETL 1110-1-163
30 Jun 96
EM 1110-1-3500
ASTM D 698
EM 1110-1-3500, Chemical Grouting.
ASTM D 698, Laboratory Compaction Characteristics
of Soil Using Standard Effort (12,400 ft-lbf/ft3
(600 kN-m/m3)).
EM 1110-2-2504
EM 1110-2-2504, Design of Sheet Pile Walls.
ASTM D 1557
ASTM D 1557, Laboratory Compaction Characteris-
EM 1110-2-3506
tics of Soil Using Modified Effort (56,000 ft-lbf/ft3
EM 1110-2-3506, Grouting Technology.
(2,700 kN-m/m3)).
EP 200-1-2
EP 200-1-2, Process and Procedures for RCRA
ASTM D 2216
ASTM D 2216, Method for Laboratory Determination
Manifesting.
of Water (Moisture) Content of Soil, Rock, and Soil-
Aggregate Mixtures.
TM 5-822-12
TM 5-822-12, Design of Aggregate Surfaced Roads
and Airfields.
ASTM D 2434
ASTM D 2434, Test Method for Permeability of
Granular Soils (Constant Head).
USP-NF-XVII United States Pharmacopeia.
ASTM D 2487
A-2.
Related References
ASTM D 2487, Classification of Soils for Engineer-
ing Purposes (Unified Soil Classification System).
a.
Predesign investigation requirements.
ASTM D 4318
ASTM D 4318, Test Method for Liquid Limit, Plastic
EM 200-1-3
Limit, and Plasticity Index of Soils.
EM 200-1-3, Requirements for the Preparation of
Sampling and Analysis Plans.
ASTM D 5084
ASTM D 5084, Measurement of Hydraulic Conduc-
EM 1110-1-1802
tivity of Saturated Porous Materials Using a Flexible
EM 1110-1-1802, Geophysical Exploration for Engi-
Wall Permeameter.
neering and Environmental Investigations.
ASTM D 5092-90
EM 1110-1-1804
ASTM D 5092-90, Recommended Practice for Design
EM 1110-1-1804, Geotechnical Investigations.
and Installation of Ground-Water Monitoring Wells in
Aquifers.
EM 1110-2-1907
EM 1110-2-1907, Soil Sampling.
ASTM D 5299
ASTM D 5299, Guide for the Decommissioning of
EPA/330/9-81/002
Ground Water Wells, Vadose Zone Monitoring
EPA/330/9-81/002, Manual for
Devices, Boreholes, and Other Devices for Environ-
Groundwater/Subsurface Investigations at Hazardous
mental Activities.
Waste Sites.
h. Miscellaneous.
EPA/530/SW-611
EPA/530/SW-611, Procedures Manual for Ground
Water Monitoring at Solid Waste Disposal Facilities.
API 13A
American Petroleum Institute (API) Specification
13A, Drilling Fluid Materials.
EPA 530/SW-846
EPA 530/SW-846, Test Methods for Evaluating Solid
Waste.
API RP 13B-1
API RP 13B-1, Field Testing Water-Based Drilling
Fluids.
A-3
Previous Page
