ETL 1110-1-158
28 Feb 95
*****************************************************************
Reference the regulatory program under which the treatability
study is being performed (i.e. CERCLA/SARA, National Contingency
Plan, any IAGs, Federal Facilities agreements, state regulatory
criteria, etc.). This paragraph should also indicate that sample
collection and testing should be carried out in accordance with
the treatability study exemption requirements as described in 40
CFR 261.4 (e) and (f).
*****************************************************************
1.5.
*****************************************************************
List the chemical and physical criteria which the treated
material must achieve. Specific test methods and procedures are
discussed in later sections of the scope of work. Shown below is
an example list of criteria. The listed values are shown only as
examples and should not be considered complete. Actual chemical
and physical criteria should be determined on a site specific
basis in accordance with the Record of Decision, regulatory
criteria, or a Memorandum of Agreement with the appropriate
regulatory agencies.
CHEMICAL CRITERIA
Max. All. Conc.
Contaminant
5.0
mg/L
Barium
100.0 mg/L
Cadmium
1.0
mg/L
5.0
mg/L
Lead
5.0
mg/L
Mercury
0.2
mg/L
Selenium
1.0
mg/L
Silver
5.0
mg/L
B-2
Previous Page
